Skip to main content

How do I build an inspection template, with questions, logic rules and scoring?

Build an inspection template in Colobbo: pages, sections, every question type, required answers, rules, logic, scoring, access and saving, then start an inspection from it.

An inspection template is the form your team fills in on site. To build one, open Templates, select New, add pages, sections and questions, then select Save Template.

You can make a question required, show it only when an earlier answer matches (Rules), ask for a note, a photo or an action when a certain answer is given (Logic), and give answers a score. Each step has a short clip, and the last part shows what the person on site sees when they start an inspection from the template.

The pictures use a sample template called TEST – Pit inspection (help article), which has three pages: site details, a sign-off, and a page that shows the other kinds of question.

How do I start a new template?

From the Templates list, the New button is selected and a blank template opens
  1. Open Templates from the side menu.

  2. Select New at the top right. A blank template opens.

The Templates list with the New button circled at the top right, and a Start Inspection button on the template row

The Templates list. New is at the top right. Each template has a Start Inspection button and a three-dot menu.

How do I name the template and describe it?

The pencil next to Name is selected, a name is typed and confirmed, then a description is added
  1. Select the pencil next to Name, type the template name and confirm it with the tick.

  2. Select the pencil next to Description and add a short description.

How do I add pages and sections?

A template is made of pages. Each page holds sections, and each section holds questions. Technicians move through the pages one at a time.

Create New Page is selected and the first page appears with an untitled section
  1. Select Create New Page. The page starts with an Untitled Section.

Rename a page or a section

The pencil on a page called Untitled Page is selected, a name is typed and the page is renamed
  1. Select the pencil next to the page or section name. An Edit panel opens on the right.

  2. Type the new name in Caption and select Update.

The Edit panel for a page with the Caption Untitled Page, and Properties and Rules tabs

The Edit panel. Pages and sections have a Rules tab as well as Properties.

Add another section

Add New Section is selected and a second section appears on the page

Select Add New Section under the last section on a page.

Let a section repeat

The pencil on a section is selected and Allow Repeat is ticked
  1. Select the pencil on the section.

  2. Tick Allow Repeat and select Update.

How do I add a question and choose its type?

Add New Question is selected inside a section and a new Text question appears
  1. Select Add New Question inside a section. A new Text question appears.

  2. Select the pencil on the question to open its Edit panel.

A section with a new question row, with edit, insert, duplicate, copy and delete buttons on the row

A new question. The buttons on the row are edit, insert a question, make a duplicate, copy and delete.

The Field Type list is opened and MultipleChoice is chosen

In the Edit panel, open Field Type and choose the kind of question.

The Field Type list showing Text, TextArea, Number, DropDown and MultipleChoice

The Field Type list. Scroll it to see the rest.

Which question types can I use?

Type

Use it for

Text

A short written answer, such as a pit number

TextArea

A longer written answer

Number

A number, such as a depth in millimetres

DropDown

Choose from a list of answers you write

MultipleChoice

Choose from a short set of answers, such as Pass, Fail and N/A

LookUp

Pick an item from a list

Date, DateTime, Time

A date, a date with a time, or a time

Currency, Percentage

A dollar amount or a percentage

CheckBox

A single tick box

Email, Phone, Address

An email address, a phone number or a location

Instruction

An instruction for the technician, shown as a link or text

Image, Media

A photo, or an attached document

Signature

A signature

A template section listing fourteen questions, one of each type, with the type name and icon at the right of each row

One question of each of these types in a section, with the type at the right of each row. The code at the far right (for example P3.S1.Q2) means Page 3, Section 1, Question 2.

An inspection form showing a tick box, email, phone, address and percentage boxes, and a document box

More question types as the technician sees them: CheckBox, Email, Phone, Address, Percentage and Media.

The end of page 3 of the inspection form, showing a drop-down, a link from an Instruction question, a LookUp box and a button named Extra findings

A DropDown (Select), an Instruction (its link) and a LookUp, as the technician sees them. At the end of a repeating section there is a button named after the section, here + Extra findings.

How do I make a question required and add help text?

A question is typed into Caption and Mandatory is ticked
  1. Type the question in Caption.

  2. Add Help Text if the technician might need a hint.

  3. Tick Mandatory if the question must be answered. Select Update.

The Edit panel for the question Is the pit lid in good condition, with help text and Mandatory ticked

Caption, Help Text and Mandatory for the lid question.

In the inspection, a required question has a red star next to it, and help text shows as a small question mark on the answer box.

How do I give a question a set of answers?

MultipleChoice and DropDown questions need answers to choose from. Tick Allow Multi Select if the technician can choose more than one.

The answers box is selected and a ready-made set of Pass, Fail and N/A answers is chosen
  1. Select the User Response's Options box.

  2. Choose a ready-made set, or select Create New and type your own answers.

The ready-made answer sets: Yes No N/A, Pass Fail N/A, Good Fair Poor N/A, Safe At Risk N/A, and Create New

The ready-made answer sets.

How do I score an inspection?

Switch Scoring on for the template, then give each answer a score. The inspection adds up the scores as the person on site answers. Scoring is a running total and a percentage. There is no pass mark and no pass or fail result.

The Scoring switch is selected and turns on

1. Switch Scoring on at the top of the template.

An answer in the options box is selected and its score is set in Option Settings
  1. Open a MultipleChoice or DropDown question and select one of its answers.

  2. In Option Settings, type the Score for that answer. Repeat for each answer.

Option Settings for the answer Pass with a Score of 1

Option Settings for the answer Pass, with a score of 1.

Option Settings also has SOR and SOR Qty boxes, to link an answer to a Schedule of Rates item. In the inspection the score shows at the top of the form and on each section, for example 0 / 1 (0.00%) while nothing is answered.

An inspection form with Pass chosen and the score reading 1 / 1 (100.00%) at the top and on the section

Pass is worth 1 here, so choosing it moves the score to 1 / 1 (100.00%).

How do I make an answer ask for a note, a photo or an action?

Logic makes the person on site add something when they give a certain answer. The sentence in the Logic box reads: If answer is Fail, then required Note and Media.

Add Logic is selected and a logic row appears

1. Open the question and scroll to the Logic box. Select Add Logic. The answer starts as [Not Selected].

The answer Fail is chosen, then Note and Media are added as required
  1. Choose the answer that triggers the rule. For a Pass/Fail question, choose Fail.

  2. Select + trigger and choose what is required. Add more than one if you need to.

The list of what can be required: Action, Media, Note and Notify

What a logic rule can require: Action, Media, Note or Notify.

The list also has Notify, which this article does not cover.

Option

What it asks the person on site for

Note

A note on the question

Media

A photo or file on the question

Action

An action raised from the question

Logic is not only for choice questions. On text, number, date and similar questions it works on [Empty] and [Not Empty] instead of an answer. A question that has Logic shows a small wand icon on its row in the template.

How do I show a question only when an earlier answer matches?

Use Rules to keep the form short. A question with a rule is hidden until the rule is true. In the sample, Describe the damage only appears when the lid is marked Fail.

Questions have codes. P1.S1.Q2 means Page 1, Section 1, Question 2. Rules use these codes.

The Rules tab is opened, a rule is built from an earlier question, a condition and a value
  1. Open the question and select the Rules tab.

  2. Select Create New Rule.

  3. Choose the earlier Question, the Rule Condition and, if asked, the Value.

  4. Select Add Rule. The rule is written in the Rules Expression box. Select Update.

The Rules Expression box showing a rule written as a sentence

The finished rule on Describe the damage. It reads ([P1.S1.Q2] EqualsTo [Fail]): ask this question only when question 2, the lid question, is Fail.

A rule can only point at an earlier question, so the first question cannot have a rule. Pages and sections have a Rules tab too, so you can hide a whole page or section the same way.

The conditions you can choose depend on the earlier question's type.

Earlier question

Conditions shown

MultipleChoice

Equals To, Not Equals To, Is Empty, Is Not Empty

Number

Equals To, Not Equals To, Greater Than, Greater Than Or Equal To, Less Than, Less Than Or Equal To, Is Empty, Is Not Empty (the list scrolls)

The Rule Condition list for a choice question: Equals To, Not Equals To, Is Empty, Is Not Empty

Conditions for a choice question.

The Rule Condition list for a Number question, with Equals To, Not Equals To, Greater Than, Greater Than Or Equal To, Less Than, Less Than Or Equal To and Is Empty

Conditions for a Number question.

Combine two rules

A second rule is built and added as AND to the first

Here the rules sit on Photo of the pit (P1.S1.Q5). It already has one rule, so build another and select Add Rule as AND (both must be true) or Add Rule as OR (either can be true).

The Rules Expression box showing two rules joined with AND

The photo question is now asked only when the lid is Fail and (AND) the water depth, question 4, is greater than 10.

A question that has a rule shows a small flow icon on its row in the template.

How do I copy, duplicate or insert a question?

Make Duplicate is selected on a question and a copy is added to the section

Make Duplicate adds a copy of the question to the end of the same section.

To change the order, drag a question by the dots at the left of its row.

Copy Question is selected, then Paste Question adds it to the section

Use Copy Question, then Paste Question next to Add New Question, to put a question into a section.

Insert Question is selected and a new question appears above the one selected

Insert Question (the plus) adds a new question above the one you selected.

Delete a question

The bin on a question is selected and Colobbo asks you to confirm the delete

Select the bin on a question. Colobbo asks you to confirm before it deletes it.

A Confirm Delete box asking Are you sure, you want to delete this question, with Cancel and Delete buttons

The delete confirmation.

How do I preview the template?

The Preview tab is selected and the template shows as a form

Select the Preview tab. It shows the template as the technician will fill it in. In the sample, Describe the damage is not shown, because its rule is not true yet.

The Preview tab showing the form with Pit number, Is the pit lid in good condition and Water depth questions and Note, Media and Action buttons

The Preview tab. Each question has Note, Media and Action buttons.

The Code tab shows the template as read-only code. You do not need it to build a template.

The Code tab showing the template as read-only code

The Code tab.

How do I open the Format Title box?

Format Title is selected and the box opens

Format Title sets what each inspection is called. Select it to open the box. It lists your questions under Available Items and what is chosen under Selected items. The template name is chosen to begin with. Set Title saves your choice.

The Format Title box with Available Items on the left and Selected items on the right showing Template Name

The Format Title box.

How do I design the PDF report?

The PDF button is selected and the report layout editor opens

Once a template is saved, a Template / PDF switch appears at the top. Select PDF to choose the report layout. For the full steps, see How to customise PDF report layouts for a template.

The PDF report editor showing that the template uses the global report layout, with a Customise for this template button

The PDF tab. A template uses the global report layout until you select Customise for this template.

Who can see and use the template?

These settings are at the top of the template.

Public is chosen under Access Level and stays selected

Access Level is Private or Public. Select the one you want. The Templates list has a matching Private / Public switch.

Internal is chosen under Visibility

Visibility is Internal or Both. When you point at Internal, Colobbo says that only your company's internal staff can see this template and the inspections made from it.

Visibility set to Internal, with a tip saying only your company's internal staff can see this template and its inspections

The tip for Internal.

The Tags box is opened and a tag is ticked

Tags label the template. Open the box and tick a tag.

How do I save the template?

Update Template is selected and Colobbo shows Saving template details

Select Save Template at the top right. Once a template has been saved, the same button reads Update Template. A saved change applies at once to inspections started afterwards. There are no versions to publish.

What can I do with a template from the list?

The three dots on a template are selected and the menu opens

Select the three dots on a template. The menu lists Edit, View Inspections, Archive, Mark as public, Bookmark template, Clone, Download as PDF, Share and Delete.

  • Archive takes the template off the main list and puts it on the Archive tab.

  • Bookmark template keeps the template near the top of the list.

The template row menu with Edit, View Inspections, Archive, Mark as public, Bookmark template, Clone, Download as PDF, Share and Delete

The row menu.

Clone a template

Clone is selected on the row menu and the Clone Template box opens
  1. Choose Clone from the row menu.

  2. Choose Private or Public, name the copy and select Clone Template.

What does the technician see?

Start New Inspection is selected on the Inspections list and a box asks for a template

You can also start from the Inspections list: select Start New Inspection, choose a template and select Start Inspection.

Start Inspection is selected on a template and the inspection opens

Select Start Inspection on a template's row. It opens as a form. Changes save automatically as the technician goes.

An inspection panel opened from a template, showing the first section, a required marker and Mark As Completed

The inspection opens from the template. The section header shows how many questions are answered and how many are required.

Fail is chosen and the Describe the damage question appears

Here a rule is working. Choosing Fail brings up Describe the damage.

Fail is answered, Mark As Completed is selected and Colobbo says what is still required

Here a logic rule is working. The technician cannot complete the inspection until the note and the photo that the rule asks for are added.

The inspection form after Mark As Completed was selected, with a red message reading Note and Media are required when Fail is selected, and a banner asking the technician to complete all required fields

The message under the question: Note and Media are required when "Fail" is selected. A banner at the bottom says Please complete all required fields before marking as completed.

Frequently asked questions

Why does a question not show in the inspection?

It probably has a rule. Check the Rules tab on the question. The sample hides Describe the damage until the lid is marked Fail.

Why can't the technician complete the inspection?

A required question is unanswered, or a logic rule is asking for a note, a photo or an action. The message names what is missing.

What is the difference between Rules and Logic?

Rules decide whether a question is shown. Logic decides what must be added when an answer is given.

Where does the score show?

At the top of the inspection form and on each section, once Scoring is on and answers have scores.

Related articles

Did this answer your question?