Skip to main content

How do I answer a checklist on the phone, including with no signal?

Answer checklist questions, add photos, and keep working with no signal on the Colobbo phone app.

This guide is for field technicians. It shows you how to answer a checklist on the Colobbo phone app, and what happens when you lose signal.

1. Open the checklist

Open the Work Order tab and tap the job you are working on. The job page opens.

Tapping a job on the Work Order tab so that the job page opens.

The job page shows the job details and status. Tap START SURVEY to open the checklist. If you have already started, the button says RESUME SURVEY.

The job page with its details, status tabs and the START SURVEY button.

The checklist shows "You completed X%" at the top. Each section has a % ring that fills as you answer its questions.

The checklist with its completion message at the top and sections showing % rings.

2. Answer choice questions

Open a section and tap a choice question. A list opens, so tap the answer you want. Your answer saves straight away, so there is no Save button to tap.

Opening a section, tapping a choice question and picking an answer from the list.

3. Add photos to questions

For a photo question, tap the photo button. Then choose Gallery to pick a photo you already have, or Take photo to take a new one. The photo appears on the question.

Tapping the photo button on a question, choosing Gallery or Take photo, and the photo appearing on the question.

4. Required questions and the % rings

Questions marked with a * are required. If you leave one blank, the app shows "This field is mandatory".

Each section's % ring fills as you answer its questions. When every section is ticked, the checklist reads 100%.

The checklist at 100 percent, with every section ticked.

To complete the job, tap the status under the job name and choose Complete. Complete needs every required question answered. If one is not, the app shows "Cannot complete — requirements pending".

5. When you have no signal

When you lose signal, this is what you will see:

An Offline bar appearing on the job, some tabs greyed out, then the app saying it is back online.
  • An "Offline" bar shows.

  • The Inspections, Media, Linked WO, Notes and BOM tabs pause, and so do some buttons.

  • When you are back online, the app shows "You're back online".

On your phone, checklist answers you add while offline are kept on the phone.

On your phone, photos you add while offline are kept on the phone too.

On your phone, these answers and photos upload by themselves when you are back online.

6. If a photo fails to upload

If a photo does not upload, a red warning icon shows on the job. Tap the icon to upload the photo again.

You cannot complete the job while uploads are still pending, so check for the red icon before you complete the job.

FAQ

Do I need a signal to answer checklist questions?

Some parts of the job wait for signal, for example the Resume survey button. Answers and photos already on your phone are sent once you're back online. If you can, open the checklist before you go somewhere with no signal.

Do I need to tap Save after I answer a question?

No. Answers save straight away. There is no Save button.

Why can't I complete the job?

Complete needs every required question (marked with a *) answered. You also cannot complete the job while uploads are pending. If you try too early, the app shows "Cannot complete — requirements pending".

Related

Did this answer your question?