Skip to main content

How do I create a work order?

Create a work order in the New Work Order panel: choose a type, pick a Site, fill in the details, then save a draft or publish.

To create a work order, open Work Order from the side menu and click the red + New button. The New Work Order panel opens on the right. Choose the work order type, pick a Site, fill in the details, then click Save as draft to keep working later or Publish to send it out.

This article follows one work order, WO-HELP-001, for the Site TEST – Riverside depot (help article), from the empty panel to the published work order. It is for admins and users who are allowed to create work orders. If you cannot see the + New button, or you see a permission message when you click it, your role does not allow it. Ask your admin.

How do I open the New Work Order panel?

Open Work Order from the side menu. Click + New at the top right. The panel slides in over the list. Its header shows New Work Order and your project name. Next to the close button there is an Open full page button. It opens the same form as a five-step page (see the last section).

The Work Order list: New is selected and the New Work Order panel opens on the right
The empty New Work Order panel: a work order type box, an Expand all button and the sections Work Order Details, Schedule and Assignment, Site and Rates, Job Notes, Location, Add Media, SOR Details and BOM Details

The empty panel. The footer has Cancel, Save as draft and Publish.

The panel is one long form made of sections that fold open and shut. Add Media, SOR Details and BOM Details (the materials list) show a Needs draft tag until the work order has been saved once.

How do I choose the work order type?

Click the Search work order type... box and choose a type from the list. You can type to narrow the list. Pick the type first, because the rest of the form depends on it. Until you do, the sections stay empty.

The type box is searched, MDU Site Survey is chosen, and the WO Code and dates fill in

When you choose a type, Colobbo fills in the WO Code and the Due Date for you. The type also decides the custom fields, the default SOR lines and which people can be assigned. Only top-level types for your project are listed.

What if I pick the wrong type?

Before you save, click Change next to the type and pick another one. Colobbo asks Change work order type? and warns that the details you have entered will be cleared. Choose No to keep what you have, or Yes, Change to carry on. Once the work order has been saved, a padlock appears beside the type. A saved work order keeps its type.

Change is selected, another type is picked and the Change work order type question appears; No keeps the first type

How do I open and close the sections?

Once a type is chosen, click a section name to open or shut it. Expand all opens every section. Collapse all shuts them.

Expand all is selected and every section opens

What goes in the Work Order Details section?

Field

Required?

What to know

WO Code

Yes

Filled in for you when you choose the type, for example WO-MSS-00000030. You can change it. If Colobbo cannot make one, it asks you to type one in.

Site

Yes

Search the list and pick the Site. Picking a Site fills in the Location for you.

Milestone

No

Only shown when your project uses milestones. If no milestones are set up for your project, the list is empty.

Priority

No

Low, Medium or High. Nothing is picked until you choose.

Tags

No

Tick one or more tags. The tag name shows in the box.

How do I change the WO Code?

Click the WO Code box, clear it and type your own code. Use a code your team can search for later.

The WO Code box is cleared and the code WO-HELP-001 is typed

How do I choose the Site?

Click Site, type part of the name to search, and click the Site. Colobbo then fills in the Location (and, when the Site has them, the service area and customer rate card).

The Site list is searched and the Site is chosen

How do I set the priority?

Click Priority and choose Low, Medium or High.

The Priority list opens and Medium is chosen

How do I add a tag?

Click Tags and tick the tags you want. The tag name shows in the box. Press the Escape key or click away to close the list.

The Tags list opens and a tag is ticked
The Work Order Details section filled in: code, Site, Priority and a tag

The Work Order Details section with the code, Site, Priority and Tag filled in.

How do the dates, team and assignee work?

The Schedule & Assignment section holds the dates and who does the work.

Field

What to know

Start Date

Starts as today.

Due Date

Filled in from the type. A type can give, for example, five days. Each type has its own number of days. A type can also count the days from the moment you pick an assignee instead. You can always change the date by hand.

Company

Only shown when your company works with partner (subcontractor) companies. It starts on None. Pick a partner company to narrow the Assignee list to that company's people. Leave it on None for your own team.

Teams

Pick one or more service teams.

Assignee

The person who does the work. The list shows None and then each person with their role in brackets.

The Schedule and Assignment section with Start Date, Due Date, Company, Teams and Assignee

The Schedule & Assignment section. The dates are already filled in.

How do I change the due date?

Click the calendar next to Due Date and pick a day.

The calendar next to Due Date opens and a new day is picked

How do I choose an assignee?

Click Assignee, type a name to search, and click the person. If the work order type needs certain skills, the list only shows people who have at least one of those skills, and an orange note above the box names the skills. If the type needs skills the assignee does not have, a note appears. A work order saved with an assignee gets the status Dispatched. A work order with no assignee gets the status New.

The Assignee list is searched and a person is chosen

Good to know: the assignee is told about the job when you click Publish, not when you click Save as draft. Leave the assignee empty if you are not ready to send the job to someone. The work order in this article has no assignee.

What goes in Site & Rates and Job Notes?

Site & Rates has Asset ID, Boundry, Service Area, Customer Rate Card and Supplier Rate Card. Asset ID and Boundry are free text. The service area and rate cards come from the Site when it has them. The supplier rate card only lists cards that match the company and customer rate card you picked.

Asset ID is typed in the Site and Rates section

Job Notes has four text boxes: Description, Appointment Notes, Special Instructions and Additional Information.

A description is typed in the Job Notes section
The Site and Rates and Job Notes sections filled in with an Asset ID and a description

Asset ID and Description filled in.

What is the Location section?

Location is the address of the job. You cannot publish without one. When you pick a Site, Colobbo fills in the street, suburb, state, postcode and country from the Site. You can edit them, or search for a different address.

The Location section already shows the Site's address
The Location section with street, address 2, city, state, postcode and country filled in

The address came from the Site. Nothing was typed here.

What are Custom Fields?

If the type has custom fields, a Custom Fields section appears. The fields sit in groups. A group shows its name and how many fields it has. A field marked Internal is for your team only. A required field has a red star, and Colobbo will not let you publish until it is filled in. A type can have several groups, and not every field has to be required.

The Custom Fields section opens and shows its fields
The Custom Fields section with a General group of two fields, one marked Internal, and a second group

A Custom Fields section with two groups. The field marked Internal is for your team only.

How do I save a work order as a draft?

Click Save as draft. A draft only needs a type, a WO Code and a Site. Colobbo saves it and shows "Work order has been saved as a draft." The panel stays open. A padlock appears on the type, and Add Media, SOR Details and BOM Details unlock. The Save as draft button goes away until you change something.

Save as draft is selected, the saved message appears and the sections unlock

How do I open a draft again?

Open Work Order from the side menu and click the Draft tab above the list. It lists every draft. Point at the row and click the small Preview icon beside the code. The panel opens again, titled Draft Work Order, with your details. The pencil at the end of the row opens the draft in the panel too.

The Draft tab is opened and the Preview icon beside the code opens the draft in the panel
The Draft tab listing the work order with its type, status and Site

The Draft tab filtered to one work order. A draft shows the status New until it is published.

The WO code link in the Draft list opens the full page instead of the panel.

How do I add media, SOR items and BOM items?

These three sections need a saved draft, because they attach to a work order that exists.

How do I add photos and files?

Open Add Media. Use the Reference or Field switch to choose which list the file goes in. Click Upload Media. A menu offers two choices: Upload from this device and Link from document library. The box also says "Drag and drop files here". The table lists each file with its name, upload date, who uploaded it and its type. The file is saved when you save or publish the work order.

Add Media is opened and the Upload Media menu shows its two choices

How do I add SOR (schedule of rates) items?

Open SOR Details. Lines from the type's template load when the work order is saved. Admins can click Add SOR to add a line. A new row opens with a search box ("Search SOR code or description..."), a quantity, a unit and the source MANUAL. The quantity starts at 0 and has to be changed before the line can be saved: Colobbo says the original quantity cannot be 0 for a manual line. The table also has rate columns, and some of them are hidden from people who are not admins.

SOR Details is opened and the Add SOR button is pointed out
The SOR Details section with an empty table with the columns Description, Original Qty, Allocated Qty, UOM, Source and Buy Rate

The SOR table on the saved draft. It is empty because the type has no default lines. See the SOR article for the rest.

How to add SORs (Schedules of Rates) to a work order covers rates, claims and approvals.

How do I add BOM (materials list) items?

Open BOM Details. The + BOM button adds a line: you choose a description from your project's BOM list, then type the quantity. The button only works when your admin has set up BOM items for the project and at least one is still free to add. Technicians and subcontractor admins do not see the button. If your admin has not set up materials for the project, + BOM stays greyed out.

The BOM Details section with an empty table and a greyed out BOM button

The BOM section of a saved draft. The + BOM button is greyed out when no materials are set up for the project.

How do I publish the work order?

Click Publish. Colobbo checks the whole form. Publishing needs the WO Code, the Site, the Location and any required custom field. If something is missing, you see "Please fill all required fields.", the empty boxes are flagged in red, and the sections that need attention open. A section that is folded shut shows a small "to fix" tag with the number of boxes to fix.

Publish is selected with the Site empty: Site is required shows under the box

When everything is filled in, Colobbo publishes the work order, shows "WO-HELP-001 has been published.", closes the panel and reloads the list. Any media, SOR or BOM changes you made are saved at the same time.

Publish is selected on the draft, the published message appears and the panel closes
The Work Order list showing WO-HELP-001 with the status New

The published work order in the list. It has no assignee, so the status is New.

The new work order appears in the Default View of the list. Open it from there to see its page. How do I open a work order and find my way around it on the web? shows what is on that page.

The New Work Order panel after Publish was selected with the Site empty: Site is required

What a failed publish looks like. The box is red and the message sits under it.

What is the full page, and when do I use it?

Click Open full page in the panel, or click the code link in the Draft list, to see the same form as a five-step page: Select Work Type, Work Details, Add Media, SOR Details and BOM Details. Use it if you prefer one screen at a time. The fields are the same.

The code link in the Draft list is selected and the full page opens on the work order
The Add Work Order page with the steps Select Work Type, Work Details, Add Media, SOR Details and BOM Details, showing the work order

The full page, open on a draft at the Work Details step.

On the page, the buttons change by step. Step 2 has Save as draft, Publish and Next. Steps 3 and 4 have Back, Skip and Next. The last step has Back, Skip & Publish and Publish. If you leave a step with unsaved changes, Colobbo asks Discard changes?

Frequently asked questions

Why can't I see someone in the Assignee list?

If the work order type needs skills, the list only shows people with at least one of those skills. A note above the box names them. Add the skill to the person, or choose a different type.

Why won't Colobbo save my draft?

A draft needs a type, a WO Code and a Site. Fill those in first.

Can I change the type after I save?

No. A saved work order keeps its type, shown by the padlock. Create a new work order with the right type.

Does saving a draft tell the assignee?

No. The assignee is only told when you publish.

Where did my draft go?

Open Work Order, then the Draft tab. Once you publish it, it shows in the list (Default View) with the status New. The Draft tab only lists drafts.

Related articles

Did this answer your question?