Skip to main content

How do I create a Site and use its tabs?

Create a Site, edit it, and use each tab on its page.

A Site is the place where your jobs happen, such as a depot, a building or a street address. To create one, open Sites from the side menu, click + New, fill in a Site Name and an address, and click Submit. Only the Site Name, the project and the address are required.

Every Site has its own page. It has tabs for its details, work orders, inspections, actions, milestones and notes. This article follows one sample Site, TEST – Riverside depot (help article), from the empty form to its tabs. It is for admins and users who can create and edit Sites. If you cannot see the + New button, your role does not allow you to create Sites; ask your admin. Some screens still say "Work Package". It is the old name for a Site.

How do I open the Sites list and start a new Site?

Open Sites from the side menu. The Sites list opens. Click the red + New button at the top right. The Site form opens on top of the list.

From the Sites list, click New to open the Site form
The empty Site form with Site Name, Select Project, Search address, Select Service Area, Rate Cards, Tags and custom field groups

The empty Site form. Site Name and Select Project have a red star.

What does the Site form ask for?

Field

Required?

What to know

Site Name

Yes

Any text, except commas and slashes.

Select Project

Yes

Starts on the project you have selected at the top of the screen. You can change it.

Address

Yes

Search for it, or enter it by hand. The Street box must be filled in. Country starts as Australia.

Select Service Area

No

Only areas that cover the postcode you entered are listed.

Rate Cards

No

The rate cards for the project's customer. Choosing a Service Area narrows the list.

Tags

No

Pick one or more tags. Each one shows as a coloured chip.

Custom fields

Only the ones marked with a red star

Grouped sections that your admin set up for the project.

Status

Not on the new form

A new Site starts as Open. You can change the status when you edit the Site.

How do I fill in the Site form?

How do I name the Site?

Click Site Name and type the name. Use a name your team will recognise in a long list.

Click Site Name and type the name of the Site

If your admin has turned off duplicate Site names for the project, Colobbo checks the name when you click away from the box. If another Site in that project already has the name, you see "A site with this name already exists in this project." and the form will not save until you change the name.

How do I choose the project?

Select Project already shows the project you are working in. To use a different one, click the box, search if you need to, and pick it. The tags, rate cards and custom fields below change to match the project you pick.

How do I enter the address?

Type the address into Search address... and pick a suggestion. Or click Enter address manually to type it yourself.

Click Enter address manually to open the address boxes

Fill in Street. Address 2 is optional (unit, floor or suite). Then fill in City, choose the State, and type the Postcode. Country starts as Australia.

Type the street, suburb, state and postcode of the Site
The Site form with the manual address filled in

The address boxes after filling them in. Colobbo works out the map position (latitude and longitude) from the address when you click out of the Street or Postcode box.

How do I choose a service area and a rate card?

Click Select Service Area and pick one. The list only shows areas that cover your postcode. Then click Rate Cards to pick the rate card for this Site. If you change the service area, the rate card is cleared, so pick it again. Both boxes are optional.

Open the service area list

How do I add tags?

Click Select Tags and tick the tags you want. Each tag you pick appears as a chip above the box. Click the × on a chip to remove it. With no tags, the box says "No tags selected."

Open Select Tags and tick a tag

How do I fill in custom fields?

Below the tags are the custom field groups for the project. Click a group, such as General, to Expand it. Fields marked with a red star must be filled in. Some fields have help text under them. A green Internal badge means the field is for your own team only. Click Collapse to close the group again.

Expand a custom field group

What if I miss a required field?

Click Submit and the form shows what is missing: "Please enter site name" under Site Name and "Address is required" under the address. Nothing is saved until they are fixed.

Submit an empty form to see which fields are required
The Site form showing Please enter site name and Address is required

The two messages on an empty form.

If the name has a comma or a slash, you see "Invalid characters: ',' and '/' are not allowed". Remove the character.

Type a comma in the Site Name to see the invalid characters message

What does the expand button do?

The button at the top right of the form, next to Submit, makes the form bigger so you can see more fields at once. Click it again to make it smaller. Cancel closes the form without saving.

Click the expand button to make the Site form bigger

How do I save the Site?

Click Submit. Colobbo saves the Site, copies the project's milestones onto it, and shows a green message, "Site created successfully". The form closes and the new Site is on the list with the status Open. Pressing Enter in a box does not submit the form; click Submit.

Click Submit to save the new Site and see it in the list
The Sites list filtered to the new Site

The new Site on the Sites list. Created By shows who made it.

To find a Site later, type part of its name into Search sites.

How do I find, filter and export Sites in the list?

The Sites list has a Search sites box above the table. Type part of a Site's name and the list narrows to match.

Click Filters, then + Add filter, to narrow the list by a column. No filters applied shows beside the button when none are on.

Click Filters to open the filter options

Next to Filters is a Milestone box, All Milestones, which lists only the Sites at the milestones you tick. Default View, Add view and All views sit above the table. A view keeps a set of filters and columns so you can come back to them in one click.

The table can show more columns than it starts with, such as Street, State, Service Area, Status, Work Order Count and Tags. You can choose the columns for a view, and drag a column heading to move it. The export box (below) lists every column.

To export the list, click the download icon at the top right, next to + New. A box opens where you choose which columns go in the report. Tick or untick columns, search for a column, or drag the handle at the right of a column to move it. The box shows how many are ticked, for example "90 of 90 selected", and has Clear to untick them all. Then click Export CSV or Save & Download, or Cancel to close the box.

Click the download icon to open Export data

How do I open a Site and see its page?

Click the Site Name in the list. The Site page opens.

Click the Site name in the list to open the Site page
The Site page with its name, address, the plus button, the milestone bar, the tabs and the Details form

The Site page: back arrow, name and address, the + button, the milestone bar, the tab bar (greyed tabs cannot be opened) and the Details tab.

  • The back arrow takes you back to the Sites list.

  • Under the name is the Site's address.

  • Green chips next to the name show any milestone that is in progress.

  • The + button at the top right opens the Create New menu (see below).

  • If your company has Record of Conversation turned on for the project, a ROC button with a count also shows here. See Record of Conversation.

  • The milestone bar has one circle for each milestone: green is completed, yellow is in progress and grey is not started. With none, it says "No milestones defined for this site yet."

How do I edit a Site?

How do I edit a Site from the list?

Point at the Site's row. A pencil and a three-dot menu appear at the right-hand end. Click the pencil. The same form opens with an Update button, and now a Status box. Change what you need and click Update. You see "Site updated successfully".

Point at the row, click the pencil, change a detail and click Update

How do I edit a Site from its own page?

Open the Details tab. It shows the same boxes: Site Name, Select Project, Status, the address, Select Service Area, Rate Cards, tags (Add / Manage Tags) and the custom fields. Change what you need and click Update at the top right. If you cannot change the boxes, your role allows you to view Sites but not edit them; ask your admin. The button is greyed out while a required box is empty. The page says "Site updated successfully" when it is saved. Status starts as Open; the other choices are the statuses your company uses, such as In Progress.

Change the status on the Details tab and click Update

Can I archive a Site?

No. Sites have no archive. The More actions menu (three dots) on the Site's row in the list has two commands, Notify and Delete. Notify is for telling a subcontractor that material is ready. Do not press it unless you mean to message them. Delete shows only if you have permission to delete Sites. Colobbo asks "Are you sure, you want to delete this record?" with Cancel and Delete buttons. Click Cancel if you change your mind. Delete removes the Site, so check before you confirm.

Open the More actions menu, choose Delete and cancel

What are the tabs on a Site page?

The tab bar sits under the milestone bar. Use the small arrows at each end to scroll it. Colobbo remembers the last tab you used on each Site while you stay signed in. The numbers in brackets are counts.

Use the arrows to scroll the row of tabs

What is on the WorkOrders tab?

WorkOrders lists the work orders for this Site only. The number in brackets is how many there are. To add one, use the + button at the top right of the page (see below).

Open the WorkOrders tab
The WorkOrders tab of a Site

The WorkOrders tab, with its Search box and columns. It is empty until a work order is created for the Site.

What is on the Inspections tab?

Inspections lists the inspections linked to this Site. Use Filter to narrow the list. Start a new one from the + button.

Open the Inspections tab
The Inspections tab of a Site

The Inspections tab.

What is on the Actions tab, and what do Linked to Site and Linked to Work Orders mean?

Actions lists the actions for this Site. The switch at the top has two settings. Linked to Site shows actions linked directly to the Site. Linked to Work Orders shows actions linked to this Site's work orders, with the work order each one belongs to. Colobbo says "Loading linked work orders..." while it finds them. With none, the list says "No actions were found".

Open the Actions tab and flip the switch between Linked to Site and Linked to Work Orders
The Actions tab with Linked to Site chosen

Linked to Site.

The Actions tab with Linked to Work Orders chosen

Linked to Work Orders.

What is on the Milestones tab?

Milestones is a table with one row per milestone: Milestone Name, Sequence, Baseline Start and End, Forecast Start and End, Actual Start and End, Status and Progress. The Status dot is green for completed, yellow for in progress and grey for planned. A new Site gets the milestones of its project. To change a date, click it, pick the new date, then click the tick to save or the cross to cancel. You see "Milestone updated successfully".

Open the Milestones tab
Click a milestone date, pick a new one and save it with the tick
The Milestones tab of a Site

The Milestones tab.

The Milestone Tracker article explains milestones in full.

How do I add a note to a Site?

Open the Notes tab. Click the Enter Notes box, type your note and click Add. You see "QA note added successfully". Cancel clears it. Each note shows who wrote it and when. You can edit or delete your own notes with the pencil and the bin. Deleting asks "Delete Note? Are you sure you want to delete this note?" and you click Yes, Delete to confirm. Special characters are not accepted.

Open the Notes tab, type a note and click Add
The Notes tab with a note on the list

A note on the Notes tab.

Why are some tabs greyed out?

Schedules & Bookings, Calendar, SOR, BOM and Documents are shown in grey. They cannot be opened from a Site page yet. Skip the greyed tabs.

How do I create a work order, inspection or action from a Site?

Click the + button at the top right of the Site page. The Create New menu lists Work Order, Schedules & Bookings, Inspection, Action, Milestone and Documents. Schedules & Bookings, Milestone and Documents are greyed out. The other three work.

Click the plus button to open the Create New menu
The Create New menu on a Site

The Create New menu.

How do I create an action from a Site?

Choose Action. The Create Action panel opens on the right. Type a Title (required). Status starts as To Do and Priority as Medium. The due date starts filled in. Add a description, change the due date or add an assignee if you want, then click Create Action. You see "Action created successfully" and the new action is on the Actions tab, linked to this Site. For every field, see How do I create an action?

Choose Action in the Create New menu and save an action for the Site
The Create Action form opened from a Site

The Create Action panel opened from a Site. The link to the Site is added when you save.

How do I start an inspection from a Site?

Choose Inspection. A box called New Inspection asks you to Select Template (required). Pick the template and click Start Inspection. The inspection is linked to this Site, so it is listed on the Inspections tab.

The New Inspection box with Select Template, Cancel and Start Inspection

The New Inspection box. Pick a template, then click Start Inspection.

How do I create a work order from a Site?

Choose Work Order. The Add Work Order page opens from this Site. It has five steps: Select Work Type, Work Details, Add Media, SOR Details and BOM Details. Pick the work type to begin. For every field, see How do I create a work order?

Choose Work Order in the Create New menu to open the Add Work Order page from the Site

FAQ

Why can't I see + New on the Sites list?
Your role does not include permission to create Sites. Ask your admin.

Why does the form say Address is required when I filled in the search box?
Pick one of the suggestions under the search box, or click Enter address manually and fill in Street. The Street box must have something in it.

Why can't I pick a service area?
The list only shows areas that cover your postcode. Check the postcode, or ask your admin to add the postcode to the area.

Why is the Status box missing on the new form?
New Sites start as Open. The Status box appears when you edit.

Where did my project's milestones go?
A new Site copies the project's milestones when you save it. If the project has none, the Milestones tab is empty.

Can I use a comma in a Site name?
No. Commas and slashes are not allowed.

Why can't I delete a Site?
Deleting needs its own permission. If the Delete command is missing from the three-dot menu, ask your admin.

Can I move a Site to another project?
Select Project is a box you can change on the Details tab. Click Update after. Tags, rate cards and custom fields belong to a project, so check them afterwards.

Why is my new Site missing from the list?
Look at the Search sites box and at Filters. If either is set, clear it. Then search for the Site's name.

Related articles

Did this answer your question?