Skip to main content

How do I start and complete a job on the phone?

Step by step, how a field technician opens a job, completes the survey, flags a Jeopardy and marks the job Complete on the Colobbo phone app.

This guide is for field technicians. It shows you how to open a job on the Colobbo phone app, answer its survey and mark the job Complete.

1. Open your job

Tap the Work Order tab at the bottom of the screen. Tap a job card to open it.

A technician taps a job card on the Work Order tab and the job page opens.

The job page shows the address, assignee, skills, due date and status. Check these before you start.

The job page showing its details, status, tabs and the START SURVEY button.

2. Start the survey

On the job page, tap START SURVEY. Once you have started, the button reads RESUME SURVEY.

The checklist shows You completed X% at the top, with a progress ring for each section. Questions marked * are required.

The survey checklist showing You completed 0% and the sections with progress rings.

3. Answer the questions

Open a section and tap a question. Choice questions open a list, so tap the answer you want.

A technician opens a section, taps a choice question and picks an answer.

Your answer saves straight away. There is no Save button.

For a photo question, tap the photo button, then choose Gallery or Take photo. The photo appears on the question.

A photo question with the photo button open, showing Gallery and Take photo.

4. If something is wrong

If the job cannot go ahead as planned, set its status to Jeopardy. The job then shows in the WO – Jeopardy count on your Dashboard.

The status under the job name being tapped, with Jeopardy chosen.

Then add a note that says what happened. Open the Notes tab, type your note and tap Add.

The Notes tab with a note typed in and the Add button.
The saved note listed on the job.

5. Mark the job Complete

When every question is answered, the checklist reaches 100%, with every section ticked.

The survey checklist at 100 percent with every section ticked.

Tap the status under the job name and choose Complete.

The status menu showing Jeopardy, Complete and Cancel.

If a required question is still unanswered, the app will not complete the job. It shows “Cannot complete — requirements pending”. Go back to the survey, answer the questions marked *, then try again.

The Cannot complete message saying requirements are pending.

6. After you complete it

Changing the status sends an email update about the job.

A completed job becomes read-only, so you can no longer change its answers.

FAQ

What happens if I lose signal?

The app shows an Offline bar, and some tabs and buttons wait until you're back online. Answers and photos already on your phone are sent once you have signal again. You can't complete the job while photos are still uploading.

Why does the app say “requirements pending”?

One or more required questions, marked *, are still unanswered. Answer them, then tap Complete again.

I can't find my job on the Work Order tab. What should I check?

Check the filters at the top of the Work Order tab, such as Assigned To and Work Order Status. A filter may be hiding the job.

Why does a safety alert appear when I open the app?

Some companies show a pre-start safety alert once a day, asking you to complete your hazard assessment before you start work. Read it and tap Acknowledge & Continue. It appears again the next day.

Related

Did this answer your question?